rudebwoy

I found a site that shows the flow rate of almost all bosch, lucas, msd,and more injectors, so I found the flow rate of the injectors I HAVE , how much cc's is 27.5lbs an hour, I need help here quick, thanks, I have a whole list of injectors flow rate

OnYx

site??

rudebwoy

website, called www.gnttype.org/techarea/fuelsysteminjflow.html found through a yahoo search, it have whole list. now back to helping me converting 27.5 lbs to cc's.

88crxSi

https://www.epsb.net/~mstrembi/inj_conv.htm

you are 280cc/min

cc/min = lbs/hr * 10.2

rudebwoy

that is pretty close to the b16a flow rate right, but these where from a turbo car, so that means I will not need a fuel computer to run these right? I should be able to use these with my factory ecu, I' m or do you think it does not worth the effort?

rudebwoy

these injectors seems to be close to a stock b16 flow rate even though they are from a turbo car, is it worth the effort to insall these? if it does worth it I should be able use my stock ecu right? I just want to run 8 psi without buying afc or something in that, price range, fmu, 255lph pump,280cc injectors, greddy fcu, fpr, what combo of that list will get me to 8 or close to?

REDLINE

Stock B16 injectors are 240cc. If you run 280cc's with a high pressure fuel pump (not high volume) like a 95psi-100psi pump it could support 10-16psi depending on how you tune your set-up.

HMT-Admin

280's running 10psi? I can max my 450's out at almost 15psi

REDLINE

With 100psi fuel pump,10psi would be fine. Smaller injectors like hondas 195cc and 240cc run at 100% duty. The dsm 450cc run 80%. Theres a big diff between 80-100% and 50psi-100psi pump.

rudebwoy

so abaz ! will the the walbro 255 qualify, to run 7-10 psi with this setup, 280cc injectors,walbo 12-1 fmu, b&m fpr,stock ecu no afc,or fuel controller.I know I ask this many times, but no direct answer, I'm completed with my kit but I would like to know before I bolt it on. thanks!