EX cam is a VX head?? will it work?
 

a buddy of mine has a 92 civic vx, and its shitty slow. i have an ex cam laying around. will it worok in his head?? i actually have the whole ex head, but it doesnt have a vtec solenoid. i know its gonna need an ex computer to make it really work. has anyone ever done this?? thanks


Brett

Re:EX cam is a VX head?? will it work?
 

the VX head doesnt really have VTEC like the EX does. all it does is make the car run in 12 valve "lean burn" mode until 3000 rpm or so, then it kicks into 16 valve mode.

Re:EX cam is a VX head?? will it work?
 

swap the rockers on with the cam. plug in the p28 ecu and bingo!

FYI, i think the VX uses a 5-wire o2, EX uses 4-wire, may need to change it.

Re:EX cam is a VX head?? will it work?
 

sweeeeeeeet. thats a good thing. the head i have has a sticking valve. his head on his car is good in every way. great, i think i might be building another little mini me!! an difference in sizes of the intake ports? this car deserves to move.



Brett

Re:EX cam is a VX head?? will it work?
 

not 100% but im sure they are bigger on the z6.

Re:EX cam is a VX head?? will it work?
 

I have the Vx motor, and I am building it up. but there are a few more differences between the Ex and Vx heads besides the cam. The Ex has bigger valves for one and the combustion chamber is shaped differently because the Vx pistons are dished while the Ex pistons are domed. while the Vx has a slightly higher compression ratio. I am not too sure on the cam profiles of either head. one thing the heads have in common is the EGR routing, THEY BOTH HAVE IT. so that makes you wonder if they are the same head.

if you have a Vx motor the first, and I mean THE first thing you need to do to get some power is to go pick up an Ex intake manifold because the Vx intake is like a straw and it is way too restrictive. then look into getting an ECU tuned to run it because any ecu besides the p07 runs it like crap.

The coolest thing about the Vx motor is very little know but it very very important. It has the second most sound bottom end only under the B16. This is due to the fact that it is a D16 block with a D15 crank in it. therefore allowing it (with proper head work) to rev to 10g.

Re:EX cam is a VX head?? will it work?
 

it (with proper head work) to rev to 10g.


id like to see that......also brett you are a bitch. its not the motor thats slow its the ---- ass tranny with terrible gearing that makes it slow. my lil bro has a vx, we put a dx tranny in it and its almost 2wice as fast