thalwr1

Ok heres the questions,Can i use the 88-89 integra ECU and resistor box and injectors on doing a mini-me into a STD civic htach 4th gen?and since its a 1.5L do i use the Vx timing belt or the Si timing belt from the 5th gen civic?Also can some one hook me up with the DPFI to MPFI conversion info and does honda sell the ECU pins i need?Thanks alot for your time and help guys!!!

thalwr1

TTT anyone??

snatch10psi

yes yes and yes use the si go to hasport to find the dx to zc thats what i used

thalwr1

OK some one tell me how to hook up the Integras Distributor on the mini-me im trying to get info but all i come up with is to use the Si distributor some one know how to do this there is some sensor i need to hook up to C1 and C2 for the 89 teg ECU thanks

zac

Eh, can't use an integra distributor for a SOHC engine, on the SOHC engines, the cylinder position sensor is internal to the distributor, and the distributor uses a 7 position plug. On DOHC engines, the sensor is external to the distributor, and is mounted near the exhaust cam. The Distributor uses a 5-position plug, and the sensor has a seperate 2-position plug. Those are the two wires (C1 and C2) that you can't figure out. Use a CRX/Civic Si/HF distributor, which works fine with either the PM6 (civic si)or PG7 (integra) ECU. Those two wires are still needed, but they're a part of the distributor harness.

thalwr1

ok thank you 4 clearing that up

45psi

https://www.homemadeturbo.com/forum/...;threadid=9452