DIY Nitrous kit guru's thread
So I'm thinking about how fun it would be to do a DIY nitrous kit and I'm wondering if any nitrous guru's see a problem with what I want to do.
Ideally I'd like to go with a zex type kit because it controls the hole ----, so my plan is to get a 10 lb fire extinguisher and start from there. For the control ---- I'll probably use an rpm window switch. The lines are a no brainer, and then all I'd really need is solenoids. Any of you guys know of any problems with a setup like this? We haven't had a nitrous thread in a while, so lets get some info up. :D |
Re: DIY Nitrous kit guru's thread
If you already haven't seen it...
http://www.diy-nitrous.fsnet.co.uk/ |
Re: DIY Nitrous kit guru's thread
I have seen that site. That guy is a nutbag, but it has alot of information. I'm trying to get some people who have done ---- like this to tell us what they've done before.
|
Re: DIY Nitrous kit guru's thread
I don't have any suggestions or advice, but I might just want to do a DIY nitrous kit now too. looks like fun.
You could always do this. http://www.geocities.com/calgarycivics/NOS.html :P |
Re: DIY Nitrous kit guru's thread
Originally Posted by alpalwal
I don't have any suggestions or advice, but I might just want to do a DIY nitrous kit now too. looks like fun.
You could always do this. http://www.geocities.com/calgarycivics/NOS.html :P |
Re: DIY Nitrous kit guru's thread
BTW, what about Cheese in a Can? Does anybody know if they have NO2 in it?
|
Re: DIY Nitrous kit guru's thread
Originally Posted by alpalwal
I don't have any suggestions or advice, but I might just want to do a DIY nitrous kit now too. looks like fun.
You could always do this. http://www.geocities.com/calgarycivics/NOS.html :P I've got a revolutionary design I thought up, I really think its gonna work great. |
Re: DIY Nitrous kit guru's thread
lol.
|
Re: DIY Nitrous kit guru's thread
you might run into problems getting that fire extinguisher filled. i've seen some hardcore redneck off road shops that do nitrous fills; that might be your ticket. what kind of pressure are those things rated for?
most bottle valves and solenoids take a -4 fitting an rpm window switch in conjunction with a WOT/microswitch is the BEST to activate everything. stay away from teflon tape, use teflon paste to seal everything up, should be good to go. i'm kind of a nitrous nut, so post up any questions you might have, maybe i can send you in the right direction. |
Re: DIY Nitrous kit guru's thread
I don't have any direct questions. I was looking at nitrous kit options for my car (scheduled to be completed in 2009) and I thought we should have a good thread about different ways of setting up cheap nitrous kits. Maybe more for the archives than anything.
|
All times are GMT -5. The time now is 09:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands