d16z mini-me
i'm thinking about doing a mini-me project. i need info on this project like cost, c/r, modification to head and block. any info would really help me. thanx
|
Re:d16z mini-me
If the z6/y8 is going on a DX you will need to use a VX timing belt. If going on a D16a6/y7 etc. you can use the stock belt.
You will need to remove the oil oriface jet on the face of the deck located between cylinders 2 and 3 (intake side) just pops out. I recommend using a 92-95 z6 factory metal head gasket. Cost can range from 150-300 bucks c/r is 10.8 a6/z6 combo, and a bit more with the y8 head. Fuel management depeneds on what car this is going into. Jeff |
Re:d16z mini-me
which do you think is a better mini-me project z6/y8 or a6/y7
|
Re:d16z mini-me
what? you got them mixed up, or I am reading them the wrong way.
they have about a ---- hair worth of difference.. But then again, I have never used the y8 head on any of them. Jeff |
All times are GMT -5. The time now is 08:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands