d16y8 what should i use out of it??
Ive got a vx and i bought a d16y8 motor complete with ecu.Now i dont really want to change the whole motor cause it will cause issues with registering cause its a bigger motor.Now out of the D16y8 what can i use to make my d15z1 more stronger.Im going to use the head for sure but what about rods,oil pump??I dont no what ecu to use yet either.
Also the car is a EG Civic obd1. |
Re:d16y8 what should i use out of it??
send me the intake
|
Re:d16y8 what should i use out of it??
send me the head
|
Re:d16y8 what should i use out of it??
lol...hey..but yeah. the motor will be fine in your car. smog wont be and issue. the motor will pass. they dont worry too much about the sohc. its the dohc vtec you gotta worry about.
|
Re:d16y8 what should i use out of it??
okay well i live in australia.And i found out its a auto motor +ecu.What hp are y8 rods rated at??
|
Re:d16y8 what should i use out of it??
auto is fine. the cam profile is a little diff but nothing really noticable. but the ecu..YUCK..OBD2..throw that thing away. if you drop that motor into your car, you wont need some of the sensors, like the one on the plastic airbox tube and the one on the cover next to the pulley. dont remember the names. use a p28 ecu 5 speed. thats the one from the sohc vtec d16z6 motors. but on the power rating, i dont know. i hope someone else here can help you out on that.
|
Re:d16y8 what should i use out of it??
Okay well ive decided to rip out the d15z1.Pull the pistons out and slap them in the y8.And use all the d15z1 sensors except o2,egr.Since ive lost my job im gona have to junkyard build it due to cash :(
|
Re:d16y8 what should i use out of it??
why use the z1 pistons in the y8???
|
Re:d16y8 what should i use out of it??
Cause they have a bigger dish than y8 pistons.So it will have less compression.
|
Re:d16y8 what should i use out of it??
dont bother...you dont need to lower it from the stock y8 compression
|
Re:d16y8 what should i use out of it??
Yeah i just relized the work involed in changing pistons.Not worth it ill just wait .
|
Re:d16y8 what should i use out of it??
you gotta understand that yes its true, lower comp, more boost. but low 9's aint bad. and if you take more off of that, you WILL lose more bottom end. but you can boost more but whats more reliable. lower comp and MORE BOOST? or stock compression with MORE BOOST. dont give up power you already have for more boost, when your motor needs the power and can't handle too much boost. theres a lot more involved in lowering comp and raising boost but this was as simple as posible just to give you an idea. good luck
|
All times are GMT -5. The time now is 01:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands