frenshawas

ok this is the story. i had a block sent to the machine shop to get cleaned up. it came back and i place it in my storge at moms house. DONT YOU KNOW SHE DECIDES TO CLEAN OUT THE STORAGE AND THROWS EVERYTHING AWAY! SO ALL I HAVE IS AN BARE A6 BLOCK.

I just got a d15 b1 from a friend like 30 mins ago for 20 bucks. i wanted to know is it possible tp build my a6 using the d15 parts. minus the crank and rods or should i just try to get another thats d16 complete.

turbocivic6776

pretty damn sure u need d16 pistons rods and crank

frenshawas

yea i know i need them cause the stroke and rod length is diffrent. i want to kno can i use everything (bolts and main caps) off of the d15 bottom end and the d15 head on the a6 block.

Guy-Fast

I heard oczc runs this setup on his 10 sec d series

frenshawas

ok ill look for it and if i cant find anything then ill send a message

Bone1

I have the answer, it starts at $1000 to get a D15 crank into a D16 block.

frenshawas

im not trying to put a d15 crank in a d16. i am trying to use the main caps from a d15 in a d16 and the d15 head on the d16 block if the only diff between the d15 and d16 non vtec motor is the stroke and cam. it would be pointless for me to spend a 1000 on forcing the d15 crank in an a6 block.

Bone1

caps are different sizes.

To have the D15 cap machined, then the cap and block line bored.....about $800

frenshawas

ok what about the head?

LilWayne

i heard that they spoon feed you over on Honda_tech


You should give that site a visit and stay there


Thats what you want is a spoon feeding? Right!? You won't get that here without pics of your momthers ****



Have a nice day!