d16 tranny in trouble
What's up i got a d16 tranny and put it up a few weeks ago, but damage the threads on the tranny for the upper tranny mounts. My question is what can i do besides changing trannys? Is it possible to get it rethreaded?
|
Re:d16 tranny in trouble
ya.. might have to go to a larger diameter bolt, depending on how bad u messed them up.
|
Re:d16 tranny in trouble
Thanks for the info. I'll try it this weekend.
|
Re:d16 tranny in trouble
Ahh, this brings a flashback to along time ago when I did my first l3 tranny swap. Basically all 3 of the bolt holes were stripped out on the back. I tried tapping them, but pretty much all the threads were gone. This is what we did to fix it. (flat rate style) Hopefully you have air tools etc etc. Using a 1/2 impact gun and a long extension. Find a little bit larger size bolt, like a standard thread size and just run that bitch in there. We call this "power tapping"
Good luck. Jeff |
Re:d16 tranny in trouble
Jeff is the answer man today
|
Re:d16 tranny in trouble
Originally Posted by chris
Jeff is the answer man today
|
Re:d16 tranny in trouble
Originally Posted by chris
Jeff is the answer man today
welcome back Jeff 8) |
Re:d16 tranny in trouble
Hey thanks that sounds good. I'm doing that tomorrow. ;D
|
All times are GMT -5. The time now is 06:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands