HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   d16 swap question (https://www.homemadeturbo.com/hybrid-tech-8/d16-swap-question-31718/)

bipedbear 12-17-2004 12:20 PM

d16 swap question
 
ok, im picking up a 91 hatch dx this weekend....and im not too trustworthy of the motor so i want to swap my d16y7 into it (the y7 is converted to 0bd1 so its not obd2 anymore) what would i have to do to make my motor work in his obd0 car.......just swap out the dizzy and injectors......or i guess i can just run my 450's with my safc.....but what else, anything? my ecu of course, or no???

SpankedYA! 12-17-2004 04:04 PM

Re:d16 swap question
 
OBD0-OBDI harness.

MikeJ-2009 12-18-2004 02:25 AM

Re:d16 swap question
 

Originally Posted by CSaddict
OBD0-OBDI harness.

Try again. :P

If you have a dx, you're gonna need to do the mpfi swap, then put the whole y7 motor into the car, and put all of the sensors from your original motor into the new motor. Obd0 only needs to read the given sensors that it has, so if your motor has 120 sensors, and your obd0 wiring harness and ecu only want 5 sensors, than plug those in and your car will be singing cumbuya.
Not sure if your distributor will bolt up to the y7 head, but this is hmt, so I'm sure you'll figure something out. My y8 into my 89 hf was cake. I had one temp. sensor looking thing that originally plugged into the hf intake manifold that there wasn't a spot for on the y8 intake manifold, so I left it unplugged and my car didn't give a ----.

SpankedYA! 12-18-2004 07:16 AM

Re:d16 swap question
 
Ah DX right :-X

bipedbear 12-18-2004 09:39 PM

Re:d16 swap question
 
ok so i just got back from the cities getting my car.....it IS a dx so yes im going to have to do the swap......what he did was he gave me an ls wire harness too....what ecu do i use? i beleive im using a p05 with my d16y7, could i also use that in this? or what.....its a 90 hatch dx.......does anyone have any helpful links they can post on how to do the mpfi swap (im going to take a look in the faq's here in a sec for some....) thanks

Dr.Boost 12-19-2004 12:03 AM

Re:d16 swap question
 

Originally Posted by asaspicer
ok so i just got back from the cities getting my car.....it IS a dx so yes im going to have to do the swap......what he did was he gave me an ls wire harness too....what ecu do i use? i beleive im using a p05 with my d16y7, could i also use that in this? or what.....its a 90 hatch dx.......does anyone have any helpful links they can post on how to do the mpfi swap (im going to take a look in the faq's here in a sec for some....) thanks

P05 is an OBD1 ECU and it is ----. It cuts out at 5500. If you want to run an OBD1 ECU you need to buy a conversion harness and an OBD1 distributor. You want a P06 ECU.

Here is a good link to the DPFI-MPFI swap:
http://www.fourthgenhatch.com/mpfi.html
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote


All times are GMT -5. The time now is 02:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands