Re:D15b2 and y7 head...which timing belt?
 

Where's that info from Don?

I think it makes sense, but I'm not completely convinced

Re:D15b2 and y7 head...which timing belt?
 

do u have the b2 head still? measure the deck to centre of cam height, compare to the y8 and get the appropriate belt.

i can see using a VX belt on a 1.5l w/ a vtec head, but a y7 is a non vtec head?

Re:D15b2 and y7 head...which timing belt?
 

yeah, the y7 is off the 6th gen DX... d16y7. I'm gonna go pick up the VX belt and try it out...

Re:D15b2 and y7 head...which timing belt?
 

after you get this running let me know how well this worked out

i got a spare d15 block and my old a6 head and im sure im going to have some extra ----

i wanna build some mini me bullshit and boost it to kingdomcum...:)

werd

Re:D15b2 and y7 head...which timing belt?
 

The a6 head will use the 106 tooth belt, that's what I had in the car. the y7 should use the 103 (fingers crossed). No one in town had the VX belt, so I ordered on hondaautomotiveparts.com which was way cheaper anyway. Should be here by the weekend and I'll let everyone know if it works...

Re:D15b2 and y7 head...which timing belt?
 

VX belt fit perfect, thought that was all I needed, but my inline fuel pump went bad... gotta get a new one... :'(

Re:D15b2 and y7 head...which timing belt?
 

i used a d16z6 belt on my d15b1 with a Y7 head

Re:D15b2 and y7 head...which timing belt?
 

you better be putting down some bitching times becuase you just bought a lsd tranny didn't you? and you're lookin at slicks right :P

rockfalls better watch out :-*

Re:D15b2 and y7 head...which timing belt?
 

This isn't a drag car... the LSD tranny will go in this winter, and the drag radials aren't going to happen. I run A032R Advans for road race though, and they should grip good if I try dragging it.

The Z6 belt probably would work, only one 2 difference, the tensioner would just be closer to it's upper range. I slipped this belt on with no issue, so I'm happy and the car runs. My head was milled .010", not a huge difference, but may make the belt a touch easier to slip on.