d15 + d16 rods?
 

I have a usdm d15 crank and d16 eagle rods with high comp pistons


can i put the d15 crank in the y8 block or will the piston heads be 2 high?

Re:d15 + d16 rods?
 

crank is not interchangable.
yea bamboo i know it is machinable :P

Re:d15 + d16 rods?
 

whats wrong with the y8 crank?

Re:d15 + d16 rods?
 

the y8 crank what balanced all wrong by the machne shop and the rod was knocking everywhere inside the block

my bearings looked like they were shedding their copper leaves >:(

all the bearings had damage to some extent, crank is nice and rough now

Re:d15 + d16 rods?
 

did they pay for it?

Re:d15 + d16 rods?
 

i dought they will

i put everything together so they are probably gonna blame me


ive learned my lesson really, dont balance ---- that way u wont lose much money

i shoulda noitced in the beginning when the pulley would wobble when i would floor it...didnt look right :-X

Re:d15 + d16 rods?
 

post a wanted ad for y8 crank. if you were in socal, i have a z6 crank. get the journals polished and check the specs. the crank might still work with oversized bearings.

Re:d15 + d16 rods?
 

was it ever spun?

pm me nukka
ur getting me excited

Re:d15 + d16 rods?
 

crank throw to high for d15 block.

Re:d15 + d16 rods?
 

It's going into a D16 block ... his Y8 crank was balanced wrong.....that's why I would never let the crank get balanced if it wasn't knife edged ..... Honda cranks are perfectly balanced from the factory....