Slo_crx1

You did check to see if there was any syncro-mesh or oil in the trans before you drove it right?

danronian

I even topped it off with Honda MTF before I drove it. That ---- is pricey.

I was gonna go with syncromesh, but from my experience, Honda MTF works a little better.

Slo_crx1

Damn...baller status...that ---- is expensive. Kinda sux you got ripped on a beat tranny. I've got a spare cx trans in my garage if you want it...I pulled it out of my friend's car with probably about 130k on it, he said it was ok when he drove it. He bought it off some little old lady, and I can't even seem to give the tranny away. It's taking up space (and I have no d-series), so if you want it, you can have it. Just gotta roll up to NEPA and grab it lol.

danronian

Tempting...
Whats your zip?

Slo_crx1

18407 I'm about to leave for work, hit me up and let me know and I'll get back at ya when I get home at 120am lol.

danronian

It'll cost me $15 in gas (45 mpg is the ----), and 4 hrs round trip, but I guess that's worth it since I've got nothing to do.


I'll get my old tranny in, and send you a message tonight.



Thanks.

Bone1

23927-PL3-000 Thrust washer
91216-PL3-005 ISB seal
91002-PL3-A04 ISB bearing (small case)

danronian

Thanks man. Those are the part #s I was searching for.

Took out the "new" tranny and installed the old one by myself. It's really not hard. In fact it's much easier than lifting a damn B series tranny into place.

danronian

Well the old one is now in, and relatively quite like it should be, but sometimes when the shifter is in neutral, and the car is idling w/the ebrake on, it makes a rattling metallic noise on and off. Not every time, usually just when the tranny is cold.

It did this before I ripped the motor/tranny out and installed the pilot/t/o/clutch, and I thought it was the pilot bearing or the t/o, or just something not attached rattling around. What could this strange noise be?

It only does it while idling in neutral, and never when the car is driving. I'm still going to take apart the one tranny I have to replace the ISB to make it a good backup tranny, but I'd like to fix this one too.

Thanks for the help if anyone can give some. This description is probably too vague, so I might just videotape this noise so someone can possible help me.

Bone1

you want BMW quiet, buy a BMW!