Anyone know how hard or easy this will be? Swapping disc brakes from a 1990 Integra to my 91 CRX HF, hoping it wont be a pain in the ***. My auto teacher said somethin about if the car has a trim with rear disc (im assuming Si had rear disc?) then it should practicaly be a direct bolt on.

This integra is my current daily driver, and is going to be my donar car for the CRX once it's ready for the swap. Anything else I should swap? *Already have coilovers, but i am keepin the suspension (selling the shell)

 

yeah...

 

just swap out the trailing arm, im sure you can use the teg brake lines or you could use steel braided lines. and your gonna need teg cables. well thats how it is on the 92-95 civics im sure its the same for the older cars. search honda-tech. many people have done this before

 

u need integra trailing arms ( with brakes on it of course)

also the brake lines and cables.

its just a bolt on affair.

 

use 90-91 crx si ebrake cables. teg ones WILL work, but you have to use some creative paths because they are a hair too long.

teg/crx rear disk brake lines are the same tho.