Crank pulley bolt.
I remember alot of people having problems removing that massive bolt/nut whatever it is..
saw this pic on the net of a good idea to "lock" the crank in place... http://tech.hybridgarage.com/tech/headswap/head07.jpg |
Re:Crank pulley bolt.
Thats pretty slick, dude.
I hate how some Hondas have the insert in the pulley for my speshhhul honduh service t00l, and some dont. For the ones that don't, but have holes in them: I built a lil tool w/2bolts sticking out attached to a 3ftlong pipe to hold it still. You just slide it in 2 holes and have an assistant hold it while you stand on another pipe attached to a 3/4" breaker bar :D |
Re:Crank pulley bolt.
I broke (2) 1/2" craftman breakerbars on mine. At least i just had to trade it in for a new one. I finally had to use a heat gun, penetrating oil and the pro air tools at my work.
|
Re:Crank pulley bolt.
huh thats pritty cool,just sux u have to take off the oil pan,but if that saves a big headache then its well worth ;)it
|
Re:Crank pulley bolt.
haahha yeah the bitch bolt of any honda.
extend the bar and lower your car onto the breaker bar. usuallly works out.. |
Re:Crank pulley bolt.
Originally Posted by alwaystootall
huh thats pritty cool,just sux u have to take off the oil pan,but if that saves a big headache then its well worth ;)it
|
Re:Crank pulley bolt.
Originally Posted by GimpyCivic
Originally Posted by alwaystootall
huh thats pritty cool,just sux u have to take off the oil pan,but if that saves a big headache then its well worth ;)it
|
Re:Crank pulley bolt.
hey !!!! was that a stab at my 145 dollar obx oil pan 8) ?!!??! LOL ;)
I must admit that the shitty obx pan with its 2 x 1/2" NPT bungs made turbo drain and oil temp sender installation a 1 minute job http://www.ecimulti.org/albums/album...0007.sized.jpg anyway in that pic you can see theres about 2" of room. |
Re:Crank pulley bolt.
^^OH ---- :-X i didn't know you had an obx oil pan, i was just cracking a joke on why that guy had his oil pan off. i just heard they were a bitch to get ligned up correctly and that you have to drill out some of the holes a little bigger where you have the studs for the oil pan.
|
Re:Crank pulley bolt.
Originally Posted by projekteg
^^OH ---- :-X i didn't know you had an obx oil pan, i was just cracking a joke on why that guy had his oil pan off. i just heard they were a bitch to get ligned up correctly and that you have to drill out some of the holes a little bigger where you have the studs for the oil pan.
https://www.homemadeturbo.com/forum/...threadid=11786 |
All times are GMT -5. The time now is 01:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands