Which company makes cams, vavle springs & retainers for D16A6???
 

the title says it all

i need valve springs...retainers and a camshaft...i want stage 1 for a d16a6 head. i only see support for sohc vtec heads and non for non-vtec...any company make them?

lewis

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

good question, i was wondering the same thing. anyone know?

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

I know that Gude (Bullfrog) makes cams for the D16a6 because i was going to buy one before turbo setup. Springs and retainers, ..i dont know about that?! Just get a port and polish head job, and buy a nice cam from Gude. I know someone who put a cam in his d16a and it felt as if that car had Vtec!! It pulled pretty niced for being N/A.

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

mine has the gude bullfrog cam. around 4000 rpm feels like vtec i swear.

i have i/h/e clutch, light flywheel and that cam, runs mid 15's N/A.

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

where are you located crx88?? Elevation really makes a difference on 1/4 mile times. Here in el paso, tx we are along the mountains so the elevation i higher...we run slower over here. If i were to go to cali i would get 1 full sec. off my et. You would probably run a 16 over here!

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

Ontario Canada.. no mountains.

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

i need springs and retainers....anyone?

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

well i just called gude and they want 295 w/ exchange for the cam...this thing better be worth it...and they can get me an enlarged throttle body to 57.1mm for 295 w/exchange also....what do you all think...im thinking about talking to a local shop about using the gude specs on the cam and have them go at it. and also with the throttle body too. thats if there is one around here that will do the cam.

lewis

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

Web cams and delta cams

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

how about JUN (good luck finding a dealer)

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

([flash=200,200 WWW.INLINEFOUR.COM HAS JUN CAMS

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

If intrested I do port work and big bore throttle bodies. i sell alot on ebay. E-mail me at -------------------- for more info if your intrested. I'm a powerseller on Ebay so I'm a trustworthy guy. Oh ya gude's prices are crazy high.

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

i dont know if a ported tb is worth that, you can put a 5.0 tb on there for hella cheap.

and the cam.. is it high overlap? usuall hot cams arent good for turbo setups. the stock cam is uaually best for turbo. but i guess you didnt say if this car is n/a or fi.

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

if youre looking for a cam i got a JG engine dynamics 301X cam i can sell ya it has a very high lift so get springs and retainers make me an offer

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

sorry bout the double post my puter froze

Re:Which company makes cams, vavle springs & retainers for D16A6???
 

you can delete one of them yourself you know ;)