|
Common Problem with motors?
I bought a motor from guy and now I have installed it in my car and now it won't run. I have everything I need to make it run but nothing happens. I was reading some posts about people putting in motors that sat around for about a year and not having any compression from it. Does this happen alot or what? I also read that you can pour a cap full of oil down in the cylinder and it will seal the rings so it will start. Is this a good idea or just a way to foul out my plugs?
|
Re: Common Problem with motors?
Originally Posted by crxrx7
I bought a motor from guy and now I have installed it in my car and now it won't run. I have everything I need to make it run but nothing happens. I was reading some posts about people putting in motors that sat around for about a year and not having any compression from it. Does this happen alot or what? I also read that you can pour a cap full of oil down in the cylinder and it will seal the rings so it will start. Is this a good idea or just a way to foul out my plugs?
take out your plugs before pouring in the oil and you wont foul the plugs with just a little oil I have never seen it. I had a zc motor that sat in my garage for I think 4 years threw it in my crx. primed the pump 3 times and did half starts to get some oil in the motor. Drove for 2 years fine before I pulled it. |
| All times are GMT -5. The time now is 02:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands