Coil over sleeves too low.
#1
Coil over sleeves too low.
Well I am budget building my DA, so I figured a set of cheap coil overs would do. I never drive it so I dont really care how it rides. I got some KYB G2's. I installed them today and the rear sits so low its on the stops (which are cut) even all the way up. The front and rear springs have no markings as being different. This sucks. I always bought H&R and I now I know why. Any ideas on how to raise the back up? I was thinking of putting a spacer under the sleeve inside the strut. When you drop the sleeve in the strut only half the sleeve is even visible. Any ideas would be appreciated. Should I put the spring on the bottom and the sleeve on the top?... hmm that might work.
#4
Re: Coil over sleeves too low.
Originally Posted by CSaddict
I think I will buy some drop springs from Tein or H and R...
#6
Re: Coil over sleeves too low.
Originally Posted by CSaddict
Just ordered Tein S tech springs. ---- that cheap Ebay coil over crap.
#7
Re: Coil over sleeves too low.
edit: i thought you wanted to buy em hahaha...the s tech's maybe drop your car an inch if that lower than stock. i have progress springs on my civic. i think they lower the car perfectly. almost as good as eibach sportlines
#8
Re: Coil over sleeves too low.
The S tech drops a DA 2" Check it out: http://www.tein.com/ti/a32.html
#10
Re: Coil over sleeves too low.
ACtually it was the KYB's. I compared them and the KYB has a large recess where the spring sits. Any coil over sleeve type wouldn't have worked. I can just add a busshing but I already have the Teins on order and I can only assume the Ebay coilovers will ride like a bag of -------!