Clutch Slave Cylinder still good after...
 

I was wondering if the the clutch slave cylinder is still good after the whole bar popped out from the Slave Cylinder. It sperated from the SC. So i had to push it back in. Is the little bar in the SC be able to come all the way out like that? Did i mess something up?

Re: Clutch Slave Cylinder still good after...
 

still good

Re: Clutch Slave Cylinder still good after...
 

is the bar suppose to be attached to something?

Re: Clutch Slave Cylinder still good after...
 

nope
mine came out and u just have to put it back in
no problems

Re: Clutch Slave Cylinder still good after...
 

the clutch pedal still feel weird after bleeding the heck out of it. So im thinking the SC might be shot?

Re: Clutch Slave Cylinder still good after...
 

maybe ur clutch is a piece of ----... i kno my clutch sucked dick n it felt "weird"

Re: Clutch Slave Cylinder still good after...
 

the clutch feels like its not fully engaging. It feels like the clutch pedal is still being press while driving. So im thinking the SC might be bad?

Re: Clutch Slave Cylinder still good after...
 

sc only operates when fully extended. if it was bad then u wouldn't be able to put it in gear when the car's on. im thinkin ur pressure plate/clutch is a piece of ----. but if u insist its ur sc then change it.

Re: Clutch Slave Cylinder still good after...
 

use the right tool to bleed ur clutch

Re: Clutch Slave Cylinder still good after...
 

a 8mm wrench? im jk

how much are those suction bleeder to suck the air out. dont need a fancy one.

Re: Clutch Slave Cylinder still good after...
 

dont buy it rent it

Re: Clutch Slave Cylinder still good after...
 

well im really crossing my fingers hoping its not the clutch or pressure plate. Im in the state of denial right now. Just hoping it would be just the SC. ;)

Re: Clutch Slave Cylinder still good after...
 

well the problem is not being able to put it in gear. It would go into gears fine. but it feels like the SC is not fully disengaging when the clutch pedal is up making the clutch not engaging fully.

Re: Clutch Slave Cylinder still good after...
 

have someone watch to see if the slave is working while you push the pedal, once i had the rod in it get crooked and keep the clutch from engaging