clutch interchanability

Reply Subscribe

Thread Tools

Search this Thread

Jul 6, 2005 | 03:06 PM

Flyspyder55

Thread Starter

0.0 BAR

Joined: May 2003

Posts: 22

clutch interchanability

would a 93 integra LS clutch work for a 96 ls?

Jul 6, 2005 | 05:19 PM

HMTguy

Guest

Posts: n/a

Re: clutch interchanability

I would assume so, not much different on those engines.

Someone else will chime in and let you know for sure.

Jul 6, 2005 | 05:23 PM

tyler durdon

0.5 BAR

Joined: Feb 2004

Posts: 93

Re: clutch interchanability

same

Jul 6, 2005 | 08:21 PM

Racintweek

3.0 BAR

Joined: Jan 2005

Posts: 2,877

Re: clutch interchanability

1st gen B16's and 90-91 tegs use a small spline one, all other b-series use a big spline one

Jul 7, 2005 | 01:05 PM

DAVe

0.5 BAR

Joined: Oct 2004

Posts: 197

Re: clutch interchanability

Quote:

Originally Posted by Racintweek

1st gen B16's and 90-91 tegs use a small spline one, all other b-series use a big spline one

i've used the same clutch on a 1st gen B16 & a B17.
if you look up any manufacturer, all the part #'s for clutches all seem to be the same. It's the same for hydro or cable.

Jul 9, 2005 | 08:54 AM

Racintweek

3.0 BAR

Joined: Jan 2005

Posts: 2,877

Re: clutch interchanability

the pressure plates and flywheels are the same but the splines on teh trans are different.

Jul 9, 2005 | 09:27 AM

Semnos

3.0 BAR

Joined: Dec 2002

Posts: 3,828

Re: clutch interchanability

Racintweek is right.
las we used a hydro tranny from a 94 civic VTi and the clutch from a cable tranny 91 civic Vti didn't fit...had the same spline count, but the shaft on de cable tranny has a smaller diameter..