clutch interchanability
would a 93 integra LS clutch work for a 96 ls?
|
Re: clutch interchanability
I would assume so, not much different on those engines.
Someone else will chime in and let you know for sure. |
Re: clutch interchanability
same
|
Re: clutch interchanability
1st gen B16's and 90-91 tegs use a small spline one, all other b-series use a big spline one
|
Re: clutch interchanability
Originally Posted by Racintweek
1st gen B16's and 90-91 tegs use a small spline one, all other b-series use a big spline one
if you look up any manufacturer, all the part #'s for clutches all seem to be the same. It's the same for hydro or cable. |
Re: clutch interchanability
the pressure plates and flywheels are the same but the splines on teh trans are different.
|
Re: clutch interchanability
Racintweek is right.
las we used a hydro tranny from a 94 civic VTi and the clutch from a cable tranny 91 civic Vti didn't fit...had the same spline count, but the shaft on de cable tranny has a smaller diameter.. |
All times are GMT -5. The time now is 07:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands