Re: Clicking when turning
Originally Posted by turbocivic6776
This problem happened on my 93 civic lx 4dr and it was the drive axle and it only made a clicking when turning and none of the boots were broken and it was stock height it also happened on my 90 hatch si and it was the same thing and it wasnt lowered either so im saying the axles still and if it is your boot that is broken it may be it because ive replaced them for inspection but they didnt click but it also wasnt severly dry so that may also cause the clicking if bad enough and if it is that bad i would replace the axle because the boot replacement might not work.
|
Re: Clicking when turning
All 4 of the axle boots are fine, but I know that doesn't mean the axle is good. This is on a eg sedan. So you guys seem to be set that the axle needs replacing? The last time I needed to change the CV axle I don't think I could feel the clicking through the steering wheel though, that is why I am a bit confused.
|
Re: Clicking when turning
Maybe this time it is just worse but i would bet it needs a new axle and we accually had to replace 2 of them in the 93 4dr because the first one we replaced wasnt the one causeing the noise so try to make sure before you waste $70 like we did
|
Re: Clicking when turning
Originally Posted by turbocivic6776
Maybe this time it is just worse but i would bet it needs a new axle and we accually had to replace 2 of them in the 93 4dr because the first one we replaced wasnt the one causeing the noise so try to make sure before you waste $70 like we did
|
Re: Clicking when turning
almost always the opposite.
|
Re: Clicking when turning
i think mine was opposite
|
Re: Clicking when turning
definatly your axle man.....it doesnt take long with a torn boot to fling all that grease all over everything and destroy the joint.
Zack |
Re: Clicking when turning
i usually wait until its so bad its obvious which one needs to be replaced cause its so loud or its all ripped open
|
Re: Clicking when turning
Update:
It was my inner tie rod end on the passenger side. The ball was loose in the socket and I could move it in/out a bit. |
All times are GMT -5. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands