cheap forged pistons?
#13
Re:cheap forged pistons?
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
#14
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!!
I think this thread is about forged pistons.. Not shitty *** low compression 100 dollar cast pistons like vitaras.
#16
Re:cheap forged pistons?
Originally Posted by Whitey
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
#17
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by AgentMurdoc
vitaras to the rescue!!!!!
I think this thread is about forged pistons.. Not shitty *** low compression 100 dollar cast pistons like vitaras.
#18
Re:cheap forged pistons?
Originally Posted by AbaZ
Originally Posted by Whitey
I'll ship you a brand new set of JE's for $350. Here's the specs;
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
COMPRESSION: 9.0:1
BORE: 3.189
STROKE: 3.433
ROD LENGTH: 5.429
COMP HEIGHT: 1.181
POSTON WEIGHT: 263
TOP RING: 1.0MM
2ND RING: 1.2MM
OIL RING: 2.8MM
#19
Re:cheap forged pistons?
Originally Posted by Kyle
that sucks for me, my block is .020" over, I'm going to need 81.5mm pistons, correct?
I don't know. there's all the specs, go check your bore and if they will fit than send me money I ordered them for a GSR but specs are specs.
#20
Re:cheap forged pistons?
Originally Posted by Whitey
Originally Posted by Kyle
that sucks for me, my block is .020" over, I'm going to need 81.5mm pistons, correct?
I don't know. there's all the specs, go check your bore and if they will fit than send me money I ordered them for a GSR but specs are specs.