Changing wheel bearings
 

Is there anything special that I need to change them? I have air tools and the whole kit and caboodle. I know you have to get them pressed on but what about taking them off? I'm assuming they need the same too and not something I can just do since I don't have a press or something I want to try doing and fudging up a 80 dollar bearing. How exactly does the hub come off the knuckle? I know it just doesn't come out on it's own once you pull the axle out. I haven't doesn't this before and it's front driverside of a 99 Acura CL.

Re: Changing wheel bearings
 

There is how-to's on Honda-Tech, Ive seen them on there before.

Re: Changing wheel bearings
 

yeah but the pics aren't working. Not to mention that my haynes manual doesn't even really cover it. Bastards! >:(

Re: Changing wheel bearings
 

I change bearings almost everyday, if u havent done it before i wouldnt without someone who has. They can ber realy bad

Re: Changing wheel bearings
 

take off your spindles, get bearings, drive to a garage or machine shop with a press, pay .5 labour go home happy ;)

Re: Changing wheel bearings
 

yup, if u ---- up the nuckle it will cost more then half an hour labour

Re: Changing wheel bearings
 

then wear gloves O0
lol it is tricky ---- tho

Re: Changing wheel bearings
 

I don't plan on putting the bearing on myself. I'm having a shop do that but how does the hub come out of the knuckle? I know it just doesn't fall out once you have the axle out and the caliper and rotor off.

Re: Changing wheel bearings
 

:1

Re: Changing wheel bearings
 

yeah really the hub is pressed into the bearing and the bearing is pressed into the knuckle.... its super simple to get it all apart, getting the bearing in/out can be tricky though. of course i have an integra not a CL but it cant be that different.