VtecHatch

Heres the deal, my car wont turn over nor will it click. i replaced the starter as well as the selinoid. After that it started for about 2 weeks then i would have to slightly hit my fuse panel for it to turn over. Now i push everytime i go somewhere. any suggestions?

HondaTuner

What do you mean by "push"

VtecHatch

correct push start

bitchasscracker

make sure the two little filips screws in the fuse box are tight and clean. better yet i would take it off and clean them and all the fuses in the box just to make sure.

Bone1

tranny to frame ground

danronian

The little plug on connector on my starter was not tight at all, and my car would just not start at all sometimes last summer. I would just shake the car, and then it would start. Once I figured that out, I was quite relieved.

Check your connections. Probably a ground.

gen4acclude

electrical problem duh check connections or reinsurt your manpon

reactone

+1
This happened to me last year, I had to install a dedicated ground from the starter to the frame to get mine to work properly.

gen4acclude

almost all starters ground through the engine on newer cars when bolted on