car wont run right
#15
Re: car wont run right
Look in the service literature for which wire color is power on all Honduhs 85+
Look in the service literature for which wire is sensor/logic ground on all Honduhs 85+
This ---- is simple, but most people melt an IAT or blow an ECU because they are stupid.
Look in the service literature for which wire is sensor/logic ground on all Honduhs 85+
This ---- is simple, but most people melt an IAT or blow an ECU because they are stupid.
#16
Re: car wont run right
ok so i hooked up the wires the right way for sure took off my battery clamp.. im still throwing code 14 for iacv.. does this mean my ecu is melted?? i tried my other one by xenocron and same code?? could the iacv be dirty or the water hoses flowing wrong way??
#18
Re: car wont run right
Originally Posted by Joseph Davis
There is no coolant sensor in your IACV circuit.
Consulting some service literature for component test flowcharts would be most rewarding at this juncture.
Consulting some service literature for component test flowcharts would be most rewarding at this juncture.
#19
Re: car wont run right
so i switched the edelbrock for a y8 intake mani and cleaned the iacv. it runs alot better but my engine is still shaking. i dont have a front mount cuz of traction bar.. is this normal for it to be shaking quite a bit. it idles at 1200rpm.. and it runs alot better it feels like it gained 20hp and now has like 60hp... LOL.. any suggestions?