Car stopped and won't start
#33
Re: Car stopped and won't start
Originally Posted by jagojon3
I think he was trying to wedge something in the flywheel to take the crank pulley off.
I tried, but the clutch was sliping I used my torque wrench to loose it and the bolt was over 250 ft-lbs...
My already slipping clutch couldn't take this load.
The next step is this damn clutch. I want to do it since like 2 months, but every week something else break and this thing is essential for the car to run.
Anyway, the starter is now in one piece. It was a bitch to put the rotor with the four spring in it
#35
Re: Car stopped and won't start
I started it today. ---- is starting on 1/4 turn, but it look like the timing is not good.
It looks like the injector put way too much gas, I don't know what is happening.
If I start it and wait 20 sec then stop. I unplug injectors and restart it (read no more gas enter in the cylinder), it start like a new one even if it don't last long 2 sec.
Maybe it's the timing, but it doesnt explain why it runs great when I unplug injectors...
I'll try new things tomorrow ------- around with TE...
That's the way I will learn I guess...
It looks like the injector put way too much gas, I don't know what is happening.
If I start it and wait 20 sec then stop. I unplug injectors and restart it (read no more gas enter in the cylinder), it start like a new one even if it don't last long 2 sec.
Maybe it's the timing, but it doesnt explain why it runs great when I unplug injectors...
I'll try new things tomorrow ------- around with TE...
That's the way I will learn I guess...
#37
Re: Car stopped and won't start
timing, order firing ,etc..
i remember when i replace water pum of my ZC DOHC looking that head cover :1
all done i the street
about stop flywheel, when i replaceed clutch, used screwdriver , not longer necessary, just that be able to be between teeths, i always do that , remove flywheel cover , stop, i use a custom mid exhaust pipe i did of my car (now runing with invidia , ill make my own new SS exhaust system soom), and with my ratchect wrench, get it done.
that vid posted above,that impact gun sucks..
i remember when i replace water pum of my ZC DOHC looking that head cover :1
all done i the street
about stop flywheel, when i replaceed clutch, used screwdriver , not longer necessary, just that be able to be between teeths, i always do that , remove flywheel cover , stop, i use a custom mid exhaust pipe i did of my car (now runing with invidia , ill make my own new SS exhaust system soom), and with my ratchect wrench, get it done.
that vid posted above,that impact gun sucks..
#38
Re: Car stopped and won't start
Nice to see I'm not alone
firing order is correct, I'm not sure about the timing. It's -17degree today so I don't want to get out to work on my car lol
I did it at -4, but -17 is a bit too cold to handle metal tools.
firing order is correct, I'm not sure about the timing. It's -17degree today so I don't want to get out to work on my car lol
I did it at -4, but -17 is a bit too cold to handle metal tools.