Bushing GSR rods
 

Jusgt out of curiosity as anyone bushed GSR rods with vitara's? They are a little bit longer and would probably reduce the deck height issue to near stock levels.

From the TT article the vitara pistons sit 1.5mm lower = ~0.060 and gsr rods are roughly 45 thou longer than LS rods.

Just thought that this would bring the comp rate up a little too.

Re: Bushing GSR rods
 

look at all of the specs of the gsr rods and think about it again.

Re: Bushing GSR rods
 

take into consideration the thickness of the rods as well...

Re: Bushing GSR rods
 

ah, not the rod width but the BE width is 0.858" which is a little too small for the D's 0.892"....

damn I thought I was on to something...

interesting enough the B20A5 uses the same rod as an H23....(off topic)