HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   building my own exhaust need muffler opinions (https://www.homemadeturbo.com/hybrid-tech-8/building-my-own-exhaust-need-muffler-opinions-59627/)

X_Josh411_X 05-17-2006 10:14 AM

Re: building my own exhaust need muffler opinions
 
folgers coffe can

Minor Threat 05-17-2006 10:44 AM

Re: building my own exhaust need muffler opinions
 

Originally Posted by JK_Motorsports
FlowTech Raptor with 3"in/out is what I'm going to rock. and It was 32.00 CAN

Where'd you pick it up? I've decided to do a 3 inch system instead of 2.5 but I'm still on the hunt for a decent muffler.

-SKUM- 05-17-2006 03:17 PM

Re: building my own exhaust need muffler opinions
 
Hay bud do a flowmaster. I have one on my a6 with a rhb5 2 1/2 all the way back with no cat, a 2 1/2 rez. and the flowmaster. It sounds almost stock. It is very quiet. But if you are not gona do a rez. it will give it a deep quiet rich tone. Like a growl not a BBBBBBAAAAAAAAAHHHHHHHHH sound. It will sound great in the car. It wont draw a bunch of attention outside the car when you go down the street.


here is a vid of my car. Its kinda hard to hear over the rustang
http://s64.photobucket.com/albums/h1...t=MOV00284.flv

THATS HOW I ROLL!!!!!!!!!

bumblezc 05-18-2006 02:36 PM

Re: building my own exhaust need muffler opinions
 

Originally Posted by Minor Threat
Where'd you pick it up? I've decided to do a 3 inch system instead of 2.5 but I'm still on the hunt for a decent muffler.

Local Speed Shop. I fiqured you can't even get a non-performance High FLow from Napa for that!!!! Heck, a Cherry Bomb is 27.99 CAN!!!!

Minor Threat 05-18-2006 05:03 PM

Re: building my own exhaust need muffler opinions
 

Originally Posted by JK_Motorsports
Local Speed Shop. I fiqured you can't even get a non-performance High FLow from Napa for that!!!! Heck, a Cherry Bomb is 27.99 CAN!!!!

Seriously, I would rock a cherry bomb turbo, but I can't get them in 3 inch out/inlets. Is the flowtech a straight through or chambered?


All times are GMT -5. The time now is 03:39 PM.


© 2024 MH Sub I, LLC dba Internet Brands