|
Brakes suck, help.
First, keep in mind that everything in my brake system worked 100% normally before I started all this.
95 SI, 4 wheel disc So yesterday I decided to swap my rear pads, i could hear what i thought to be the little squealers at the end of a dead set of pads. After tearing into it i find instead that both calipers are locked up harder than hotrex with a cockpump and 6 syringes of his favorite roid. So I replace the calipers... As I am bleeding the brakes, I notice my brake fluid is almost foam (lots of air) and then the front right brakeline bursts. Turns out one of the mount tabs for the rubber hose was not in place, so it was rubbing metal. So today I replace that. I rebleed the brakes and was getting no air, and the pedal seemed to feel good. But as soon as I start the car I get like 3/4 dead pedal. I dunno wtf is up now. Is there just a buttload of air in the system still way up in there I need to work out? Other ideas? |
Re: Brakes suck, help.
Yep, I'd say bleed it some more there is air in there somewhere. When you pump up the brakes can you build up any pressure at least for a little bit (with the car on)? And have you bled the entire system i.e. at each wheel in the correct order?
Front right Rear right 4 1 2 3 Front left Rear left |
Re: Brakes suck, help.
u got air in the lines
get that suction tool or just keep bleeding use a tube and a jar so u dont suck in more air as ur bleeding |
Re: Brakes suck, help.
Originally Posted by jagojon3
Yep, I'd say bleed it some more there is air in there somewhere. When you pump up the brakes can you build up any pressure at least for a little bit (with the car on)? And have you bled the entire system i.e. at each wheel in the correct order?
Front right Rear right 4 1 2 3 Front left Rear left i am guessing i just quit too early on the bleeding. back at it tomorrow I suppose. btw jago...the order seems off...ive been told farthest away from Master and work toward it 1. passenger rear 2. driver rear 3. passenger front 4. driver front |
Re: Brakes suck, help.
Ah, do it the ol' way, Top up the cylinder REALLY full, crack you bleeders, come back in an hour!
Never done it this way, but from readin it works the best with the biggest mess!!!! I have a vacuum bleeder, the handpump style (kinda like hotrex's pump, just of a different nature) and I still find manual bleeding with a hose, and bottle of fluid mouted higher then the bleeder is the best way |
| All times are GMT -5. The time now is 03:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands