HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Brake Booster FUDGED?? UPDATED NEED HELP ASAP (https://www.homemadeturbo.com/hybrid-tech-8/brake-booster-fudged-updated-need-help-asap-93309/)

JoshMO 07-05-2008 08:02 AM

Brake Booster FUDGED?? UPDATED NEED HELP ASAP
 
I'll make this short and sweet.

1- Parked the car last night, then got back in the car 2 hours later. BRAKE light came on.
2- Drove it home (brakes worked), pulled in driveway, checked the reservoir. Bitch is empty.
3- Figured it must have just gotten low (its been a while since I've had to add ANY AT ALL)
4- Filled it up. Then went to bed.
5- Got up this morning. Started her up. Noticed the brake light was on AGAIN!
6- As I was driving to work I noticed the brakes were VERY SPONGY, so I babied it to work.
7- Pulled up to work (brakes barely working) and checked the reservoir again. EMPTY!
8- Checked closer with a flashlight and its leaking from where the reservoir bolts to the booster (i.e big black thing)


My question is, is it possible the reservoir went bad or am I possibly looking at replacing the whole ------- unit? I'm not sure how I'm going to get the car home to work on it just yet. I'll be here for another 11 hours...
Also, I've never had to price anything like this on a honda civic. Any experience with that?


BTW obviously I've never had to replace something like this on any of my cars so I have ZERO experience with that. (other than pads and discs)

http://i255.photobucket.com/albums/h...ake_leak-1.jpg

Smith-02 07-05-2008 11:26 AM

Re: Brake Booster FUDGED?? With PIC
 
seals blew out on your master cyl. get a new master and a new gasket.

JoshMO 07-05-2008 11:31 AM

Re: Brake Booster FUDGED?? With PIC
 
So I couldn't get by with just replacing the gasket? Or did the gasket fail because the MC is ----?

Smith-02 07-05-2008 11:49 AM

Re: Brake Booster FUDGED?? With PIC
 

Originally Posted by JoshMO
So I couldn't get by with just replacing the gasket? Or did the gasket fail because the MC is ----?

brake fluid eats lots of things. your orings failed in your master. then your gasket met mr brake fluid, or it was just bad in the first place

jarebear667 07-05-2008 11:50 AM

Re: Brake Booster FUDGED?? With PIC
 
they are very easy to install two bolts, bench blead the new one install and blead all 4 corners and the gasket is more for just keeping dust out.

JoshMO 07-05-2008 12:38 PM

Re: Brake Booster FUDGED?? With PIC
 
1 Attachment(s)
So I got it apart, and I'm pretty sure this isn't what failed... and this can't be what holds the brake fluid under pressure. So I'm thinking you're right Complex. I'm going to need a new MC. Let me know guys, I have to leave in about 10 mins to get a new one.

Attachment 16665

Birdley42008 07-05-2008 02:40 PM

Re: Brake Booster FUDGED?? UPDATED NEED HELP ASAP
 
... whats the update? MC problem?

JoshMO 07-05-2008 03:19 PM

Re: Brake Booster FUDGED?? UPDATED NEED HELP ASAP
 
yea just got finished replacing the MC. surprisingly it only took me about an hour to: bench bleed the MC without a bench or vice lol, install the MC, and bleed the brakes. So now I have brakes again. Thanks for the advice guys.


All times are GMT -5. The time now is 03:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands