HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Bay Pic of my LS/Vtec CRX (https://www.homemadeturbo.com/hybrid-tech-8/bay-pic-my-ls-vtec-crx-28/)

BLACKSI 12-13-2002 01:20 AM
Re:Bay Pic of my LS/Vtec CRX
 
come on jim let the rex out on the drag strip too.
hey jeff post some pics of the shift linkage so everyone knows why you dont modify a d series shift linkage to work on a b series setup, its not pretty.

Beau

xxhybridcrxmanxx 12-13-2002 04:05 AM
Re:Bay Pic of my LS/Vtec CRX
 
ok, this may come back to bite me but doesn't the ls/vtec combo have a fairly high compression ratio over both the standard ls and or gsr? if if so will that not be a problem when it comes to adding the turbo later??
feel free to bite my head off now....

turbohf 12-13-2002 04:12 AM
Re:Bay Pic of my LS/Vtec CRX
 
he is running stock LS pistons, thats a 9.7:1 CR (says that above). the B16A has like a 10.2:1 and the GSR has around the same. he should be ok with a turbo...

BLaze 12-13-2002 10:33 PM
Re:Bay Pic of my LS/Vtec CRX
 
Those look like NGK wires... Are those nology's? Did you notice a gain in power of anykind? worht the $$?

Justin

HMT-Admin 12-13-2002 11:39 PM
Re:Bay Pic of my LS/Vtec CRX
 
Originally Posted by Blaze
Those look like NGK wires... Are those nology's? Did you notice a gain in power of anykind? worht the $$?

Justin


Yes they are Nology hotwires, I found 3 of them in the garbage behind a local import shop.. (brand new) I called up nology and ordered the 1 missing wire and put them on. Did I notice a gain? I have no idea, since they are the only wires I have ever used on this motor. But I honestly doubt they made any bit of a differnce. I use to have a set on my old D16a6, and they were nothing special.. Very overrated.. (but nice ground straps on the wires!)

Jeff

Turbo-Dan 12-16-2002 08:55 PM
Re:Bay Pic of my LS/Vtec CRX
 

Yes they are Nology hotwires, I found 3 of them in the garbage behind a local import shop.. (brand new) I called up nology and ordered the 1 missing wire and put them on. Did I notice a gain? I have no idea, since they are the only wires I have ever used on this motor. But I honestly doubt they made any bit of a differnce. I use to have a set on my old D16a6, and they were nothing special.. Very overrated.. (but nice ground straps on the wires!)

Jeff
what i would like to know is what were you doing in the garbage behind an import shop??
lol, j/k man, nice score! ;D

HMT-Admin 12-16-2002 08:57 PM
Re:Bay Pic of my LS/Vtec CRX
 
Originally Posted by Turbo-Dan

what i would like to know is what were you doing in the garbage behind an import shop??
lol, j/k man, nice score! ;D
LoL, lets just say I am a dumpster diver ;D I have got lots of good stuff behind that shop!

Jeff

BLACKSI 12-16-2002 09:10 PM
Re:Bay Pic of my LS/Vtec CRX
 
I found jeff sleeping in the dumpster behind Safeway once. He said he just got tired after looking for dinner.

Beau
;) heh J/K Jeff

JHill 12-17-2002 09:09 AM
Re:Bay Pic of my LS/Vtec CRX
 
Dumpster diving is very hard work, and I can see why Jeff might need to nap on occasion. :D

beerbongskickass 12-18-2002 05:42 PM
Re:Bay Pic of my LS/Vtec CRX
 
Is the LS/VTEC really worth it? I have did a little research and read good and bad things about building this engine. The idea seems good since you get the displacement/torque at the low end and VTEC at the top end. But since the LS block wasn't designed to rev as high as the GSR head, how well does this block/head combo really work together as far as reliability and cost?


All times are GMT -5. The time now is 07:12 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands