Bad Ignition Switch?
 

So I'm doing a manual to auto swap in a 93 civic. Everything is good to go, except the wiring.

I've taken the two big wires (black-white, black-red) from the white a/t gear selector slider and twisted them together. ---- won't start. Take and apply 12v to the two wires twisted together (like from the yellow wire in the bunch that go to the white slider) starter cranks, and car runs tits. wtf am I missing? All the fuses seem to be good, even the main 50A under the hood. I'm thinking bad ignition switch.

Re: Bad Ignition Switch?
 

spent an hour today tracing wires and checking EVERY fuse, still can't find it. help?

Re: Bad Ignition Switch?
 

interlock switch on the pedal assembly

Re: Bad Ignition Switch?
 

you talking about the clutch pedal? i know about the two switches, neither are hooked up. i thought you could just bypass the upper one by connecting the two big wires from the white gear selector slider. sure you could start the car in gear, but i'm not an idiot

Re: Bad Ignition Switch?
 

I dont bypass wiring I do what the book tells me. Book tells me interlock switch its very common