b18a swap now with pics
Well the civic is painted and the engine is in and now ive ran into a problem there are 2 plugs that dont plug up Ihave the engine wiring harness and the ecu the ecu plugs right up but the engine wiring harness will not plug up to 1 plug on each side of the engine bay its pissing me off becuase i cant find a wiring diagrahm anywhere to figure out wtf they are any ideas ill get some pics of the plugs tommorrow morning and post them up
Phil Oh by the way its a 90 civic dx hatch standard This is a pic of the plug coming from the ecu on the rightside of the engine bay http://www2.freepichosting.com/Images/421458130/0.jpg This plug is on the left side i bielieve it isnt used in the swap anybody know?? http://www2.freepichosting.com/Images/421458130/1.jpg This is the plug coming off of the resistor box wich wont plug into the plug from the ecu? http://www2.freepichosting.com/Images/421458130/2.jpg Pic of the car done accept for the wiring and small stuff http://www2.freepichosting.com/Images/421458130/3.jpg The engine in finally http://www2.freepichosting.com/Images/421458130/4.jpg |
Re:b18a swap now with pics
Bump cuz i need to get this ---- figured out!
|
Re:b18a swap now with pics
bump cause i like the blue
|
Re:b18a swap now with pics
im pretty sure you need to "de-pin" those connectors with a safety pin, or a pin extractor if youre a baller, and plug the pins into the appropriate connectors that will fit. BTW, i dont have any diagrams on what needs to be repinned for your swap. i just know that when i have helped some friends with their swaps that repinning ---- was necessary. you need to lookup the wiring diagrams, or get lucky by having somebody here tell you what to repin.
then again i know that sometimes connectors are not used and people just let them hang in the engine bay(i personally have a few of those). |
Re:b18a swap now with pics
i take it this is an B18a motor. you need to use the harness that came with the car and need to splice a few connections.
|
Re:b18a swap now with pics
onyx saved my ass a few times on my swap, I had some wiring issues. I wish I could help you, I'm just not sure about some of that stuff.
|
Re:b18a swap now with pics
Well does anybody happen to have a 1.5 liter dpfi wiring harness around for cheap??????
|
Re:b18a swap now with pics
do you have manuals for your car and the car the engine came out of? check out the sticky by TJMX, he's a baller.
|
Re:b18a swap now with pics
Yeah i have the chiltons for both sittin right here and i just called redline performance in arlington and they said i need a 1.5 wiring harness cuz the guy who traded me for my old civic lied to me and told me it was the 1.5 harness from his rex already wired for mpfi that ------ bastard id love to drive to san antonio and kill peeps
|
Re:b18a swap now with pics
just making a few guesses from the pics...
92-93 B18A1 intake manifold (no dashpot and the holes are plugged for the air boost valve) 96+ B18B valve cover so which engine is it?? b18a1 92-93 or b18b 96+ |
All times are GMT -5. The time now is 06:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands