B18A motor swap DONE! shitload of pics (56K users grab a snack)...
as some of you may know i am putting a B18A1 (USDM) engine and tranny in my 88 CRX HF. here are some pics and commintary on the swap...
we will start off with the work area: http://www.imagestation.com/picture/...b/fb69553b.jpg http://www.imagestation.com/picture/...9/fb5b8b54.jpg http://www.imagestation.com/picture/...1/fb5b8b5a.jpg you always need tunes when your working. got my intercooler sitting and waiting for the next phase of this project... http://www.imagestation.com/picture/...a/fb5b8b60.jpg this is the old motor right before pulling it. its a D16A6 (Si motor) and 'DX' tranny. engine has some miles on it and several turbo miles (with shitty boost control), and the trannys bearings are fucked too (might be why it was in a car at the junkyard ::)) http://www.imagestation.com/picture/...e/fb5b8b64.jpg ahh pic of the motor mid pull...btw i pulled the motor all by my self, didnt think anyone would show up friday night to help... http://www.imagestation.com/picture/...e/fb5b8b7f.jpg http://www.imagestation.com/picture/...9/fb602161.jpg http://www.imagestation.com/picture/...0/fb5b8b79.jpg not a clutch expert but i see some pretty colors :o there was some good amounts of heat in this clutch. looks suprizingly good for a junkyard clutch that seen boost on may occasions... http://www.imagestation.com/picture/...8/fb69a177.jpg http://www.imagestation.com/picture/...5/fb69a17f.jpg http://www.imagestation.com/picture/...b/fb5b8b76.jpg pics of my ARIZONA RACE & MACHINE billet engine mounts (btw if your out there listening i could use a Twin-Trac soon ;)). these are really nice mounts, you cant say no to billet there too sexy, also very solid, you can shake the engine and the whole car will move. http://www.imagestation.com/picture/...1/fb5b8b86.jpg http://www.imagestation.com/picture/...d/fb5b8b68.jpg http://www.imagestation.com/picture/...0/fb5b8b8c.jpg its a PR4/PR3/PM6/PM7....it does it all!!! haha im running some PR4 tune i found. PR4 + FI 160% boost comp, .7 retard, 450s etc (no im not boosted) http://www.imagestation.com/picture/...7/fb695533.jpg the 91 teg "A1" tranny i got from onyx, not too many missing or broken parts ::) http://www.imagestation.com/picture/...6/fb695534.jpg ;D my T3 .63ar exhaust housing that will be going on the B18. not sure what happen to the pic of the rest of it... anyway thats about it. oh here is the info on my setup: 88 CRX HF 90 B18A1 (USDM) 91 teg A1 tranny 90-93 teg non-ABS axles/inter. shaft stock header Greddy SP exhaust Cold air intake Zdyne SECU Gold w/450s running PR4 tune all gay vacuum lines and ---- they connect to gone, just what is needed (boost gauge, MAP, FPR, PCV) |
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
good deal man, congrats! How about that TPS??? ;)
|
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
my TPS wasnt broken ;D i will PM you some pics of a good one...
btw my tach dont work worth ----, not even a twitch?!?!?!?!?! wtf is up with that? |
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
Originally Posted by turbohf
my TPS wasnt broken ;D i will PM you some pics of a good one...
btw my tach dont work worth ----, not even a twitch?!?!?!?!?! wtf is up with that? |
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
sorry that was a question for everyone...
|
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
I know, just thought I'd offer my (lack of) input:P
|
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
my guess is that on the hf harness the tach wire is on a different pin then the b18a harness..
|
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
you think so? never heard of anyone else having a problem with this swap...
what color is the tach signal wire on the LS? on the HF? |
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
oh and if the pins are in a different spot something else is in the wrong spot then, wouldnt that throw a code?
|
Re:B18A motor swap DONE! shitload of pics (56K users grab a snack)...
get a service manual buddy :)
|
All times are GMT -5. The time now is 09:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands