HomemadeTurbo - DIY Turbo Forum - B swap, d compatible parts?

Page 2 of 2

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - B swap, d compatible parts? (https://www.homemadeturbo.com/hybrid-tech-8/b-swap-d-compatible-parts-15718/)

projekteg

02-12-2004 04:58 AM

Re:B swap, d compatible parts?

Quote:

Originally Posted by BlackLabelBoardr

I was thinking about turboing the d series up, but I was looking into it, and Im running OBD2, and i hear its gonna be a bitch to convert to OBD1 and then get an ems....

all you need is a conversion harness (under 100 bucks), and an obd1 ecu

turbodx

02-14-2004 09:29 AM

Re:B swap, d compatible parts?

i think the fuel rail will work

91civicZ6

02-14-2004 09:53 AM

Re:B swap, d compatible parts?

the fuel rail will NOT work. 92-95 engines and b-series have the same style fuel rail (but injector spacing is different), so the fuel pressure regulator is compatible between these two. BUT, on 96+ cars, the fuel pressure regulator has a different pattern on the holes, so that is not compatible either.

you MIGHT be able to use the accessory underdrive pulleys. the air intake will work along with the catback, nitrous, and injectors. everything else, you might as well sell it.

All times are GMT -5. The time now is 08:28 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page