B swap, d compatible parts?
 

I was thinking about doing a B swap in my 99 EX, but the one part that I was unsure about is I have already purchased about 1-2 grand in parts for the d motor:
AEM: fuel rail, cam gear, under drive pulleys, air intake and fuel pressure regulator.
DC 4-2-1 header, tsudo n-1 cat back, nology hotwires, zex nitrous oxide system, accel fuel injectors

Now if I do a b swap, can i salvage any of these mods, or am i just SOL?? Cuz if thats the case, I'm not gonna follow through with the b swap

Re:B swap, d compatible parts?
 

no not really, out of that list, the things you could use if you did a b swap would be your cat-back exhaust, nitrous, and injectors, and you could use the intake with slight modification, everything else is pretty specific to the engine.

Re:B swap, d compatible parts?
 

sell all that crap here, you'll get some money atleast.

Re:B swap, d compatible parts?
 

you can use the fuel rail and fpr also, no need to modify the intake, you just need a bigger coupler.

Re:B swap, d compatible parts?
 

b and d fuel rails are the same???

Re:B swap, d compatible parts?
 

na, i dont think b and d-series fuel rails are the same. just turbo the d-series!!!! 8) you'll be happy when you take out the b-series!

Re:B swap, d compatible parts?
 

I was thinking about turboing the d series up, but I was looking into it, and Im running OBD2, and i hear its gonna be a bitch to convert to OBD1 and then get an ems....

Re:B swap, d compatible parts?
 

just use the afc hack! if not re-pogram your ecu. i'm sure you can still do it with obd2

Re:B swap, d compatible parts?
 

or get the obd2->obd1 conv harness from hasport and chip a p28 and use uberdata.

Re:B swap, d compatible parts?
 

no

Re:B swap, d compatible parts?
 

all you need is a conversion harness (under 100 bucks), and an obd1 ecu

Re:B swap, d compatible parts?
 

i think the fuel rail will work

Re:B swap, d compatible parts?
 

the fuel rail will NOT work. 92-95 engines and b-series have the same style fuel rail (but injector spacing is different), so the fuel pressure regulator is compatible between these two. BUT, on 96+ cars, the fuel pressure regulator has a different pattern on the holes, so that is not compatible either.

you MIGHT be able to use the accessory underdrive pulleys. the air intake will work along with the catback, nitrous, and injectors. everything else, you might as well sell it.