HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   axle woes. help mah! (https://www.homemadeturbo.com/hybrid-tech-8/axle-woes-help-mah-73748/)

crx2fast 02-10-2007 07:39 AM
Re: axle woes. help mah!
 
had something like that happen to me... axle was stuck in the half-shaft.. tried everything, i meen everything.. like unbolting the half-shaft and axle, taking it to local firestation were my buddy worked, and trying to sepperate it with the jaws of life. and it still would not budge, ------- thing was cracking the metal housing around the halfshaft.. ---- can rip a door off in the matter of seconds, but couldnt seperate an axle :(

sometimes ---- just wont come off.

idiot-stick 02-10-2007 08:45 AM
Re: axle woes. help mah!
 
Originally Posted by crx2fast
had something like that happen to me... axle was stuck in the half-shaft.. tried everything, i meen everything.. like unbolting the half-shaft and axle, taking it to local firestation were my buddy worked, and trying to sepperate it with the jaws of life. and it still would not budge, ------- thing was cracking the metal housing around the halfshaft.. ---- can rip a door off in the matter of seconds, but couldnt seperate an axle :(

sometimes ---- just wont come off.
you ever thought of becoming a motivational speaker? lol


I might give that rotating and prying thing a try but im not gonna get my hopes up.

crx2fast 02-10-2007 09:00 AM
Re: axle woes. help mah!
 
haha didnt meen to give you no hope at all lol

but if its comming out and going back in it should come out. that metal ring thingy they put on there is probly just getting in the way.. one good pop from the top and bottom should do the trick.

Bone1 02-10-2007 10:55 AM
Re: axle woes. help mah!
 
just don't ruin the case......and you can.....

H22 JDM LSD, person tried to drive the axle out from the other side.....the clip was so fucked up he ended up "driving the diff. out" the other side. Cracked around the bearing race/axle seal area.

Note the diff ONLY fits a JDM LSD case, try finding a spare!

idiot-stick 02-10-2007 11:28 PM
Re: axle woes. help mah!
 
Eh I said ---- it and swapped the outboard joint with one from another axle. Wasnt as hard as I thought, so that's done, now i gotta fix the other side. Hope to be back on the road tomorrow by lunch :6

idiot-stick 02-13-2007 08:01 AM
Re: axle woes. help mah!
 
It's all gravy now ;D


All times are GMT -5. The time now is 12:28 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands