Automatic to manual
Hiya
I have a automatic 98 civic (d16y8) and i wanted to change it over to manual. I know it can be done but not quite sure what items are needed besides the obvious manual transmission. As far as which ones can used, what years...etc. If ya can give me some insight it would be much appreciated thanks |
Re:Automatic to manual
That is going to be really a lot of work to do, and would be easier (probably cheaper too) if you sold the car and bought the one you want.
But, if that is what you want to do, then start thinking about: clutch master cylinder (are the mounts even there for it) slave cylinder and lines complete pedal assembly for manual tranny ECU shift linkage console (if you desire) axles may be different? flywheel clutch I am sure there is other stuff too, but I don't know. Jim |
Re:Automatic to manual
Originally Posted by JHill
That is going to be really a lot of work to do, and would be easier (probably cheaper too) if you sold the car and bought the one you want.
But, if that is what you want to do, then start thinking about: clutch master cylinder (are the mounts even there for it) slave cylinder and lines complete pedal assembly for manual tranny ECU shift linkage console (if you desire) axles may be different? flywheel clutch I am sure there is other stuff too, but I don't know. Jim ECU can be converted; the axles are the same for both a manual and a stick. Shift linkages from a 92 to 00 civic/del Sol will work (SOHC), you need a set of pedals and a clutch reservoir and all the plumbing to the slave cylinder. You will need a flywheel and clutch and about 3 to 4 days to do this at a reasonable pace. Let me know if you want the factory manual pages for it. And the console is the same for a stick and an auto. The tranny needs to be replaced of corse:) |
All times are GMT -5. The time now is 01:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands