I've searched and could not find any info on the da's. I know that on the eg's and dc's, that you can get an aftermarket tranny mount that would bolt right up to the existing auto bracket. Or get the manual tranny bracket from honda and cut the existing auto bracket off and weld the new one in.

But does this also applied to the 90-93 tegs? If so, where do I find the aftermarket tranny mount from? If it matters I got all the parts from a wrecked 92 integra ls manual tranny. Its everything from all the little pieces to the mounts. I've tried looking at place racing website but its down. If anyone has done this or know of someone that has done this swap, please let me know.

I'm planning on doing it next weekend for a friend. thanks ppl

 

checked H-T yet? I would guess not, look at this:

http://honda-tech.com/zerothread?id=...295755#9295755

I am considering doing what you are doing down the road, take lots of pics and do a writeup man! Haven't seen one out yet.

-Ryan

 

thanks bro, but I found it. Here's a link http://www.g2ic.com/forums/showthrea...ht=auto+manual. I'm gonna do a write up and take the pics as well. I'll let you guys know how it turns out next week.