HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   anybody work on 87 accord (https://www.homemadeturbo.com/hybrid-tech-8/anybody-work-87-accord-61845/)

cloud 05-22-2006 07:40 PM

anybody work on 87 accord
 
I'm going to help a friend replace his alternator. Is it hard to get to? Does the axle have to come out?

cloud 05-23-2006 11:52 AM

Re: anybody work on 87 accord
 
nobody??

HMTguy 05-23-2006 02:21 PM

Re: anybody work on 87 accord
 
Here ya go

http://img365.imageshack.us/img365/7613/24184nz.jpg

accordepicenter 05-23-2006 06:13 PM

Re: anybody work on 87 accord
 
If its EFI then you dont have to take the axle out you can work around it, just take the airbox and air filter out of the back of the engine and pull the alternator out from there. If its carb, this doesnt work, youll have to take the axle out.

cloud 05-24-2006 12:47 AM

Re: anybody work on 87 accord
 
I just went ahead and did it. You just have to remove the axle from the steering knuckle, but it doesn't really come down though. You have to remove the sway bar, piece the strut sits in and the rod that connects to the front crossmember.

90integraturbo 05-24-2006 01:49 AM

Re: anybody work on 87 accord
 
i had a 89. Take out the axle and move it around until it falls out. Remove the alternator braket to make it come out.

cloud 05-24-2006 02:48 AM

Re: anybody work on 87 accord
 
I got it, yeah that braket has to come off. ------- ---- ended up taking hella.


All times are GMT -5. The time now is 03:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands