ANOTHER MINI-ME QUESTION
 

Is the mini-me swap for a d16a6 the same as a d15 motor? Antyhing diferent than if i were to swap with a d16a6?

Re:ANOTHER MINI-ME QUESTION
 

The D16 is bigger. :P The compression would be different. Here play with this for a while. https://www.homemadeturbo.com/forum/...;threadid=6456 ;D
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:ANOTHER MINI-ME QUESTION
 

Ive used that before. What i was wondering, is if I were gona swap a z6 head on to a d16a6, would it be the same exact swap(as in steps, and what i have to do) to put a z6 head on a d15.

Re:ANOTHER MINI-ME QUESTION
 

As far as the general bolts, oil passages and wiring I would say yes, they are the same, but I have never done a mini me so I know nothing. :P
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:ANOTHER MINI-ME QUESTION
 

Anyone know, is there anything diferent between the two swaps?

Re:ANOTHER MINI-ME QUESTION
 

The only thing different is the timing belt for the 1.5 uses a VX timing belt, and othere than that everything else is the same. I've got a D15b2 with a z6 head but still messin' around with the timing. Best thing if you go minime is to get a adj. cam gear cause timing is a total pain in the ass on these things.

Re:ANOTHER MINI-ME QUESTION
 

What about a BTM , would that be sufficent? Also, i could use it if i have plans to turbo it, which i probably would.

But the timing belt is the only thing diferent?

I heard somewhere that you have to modify the dizzy. That i understand. Is there anything diferent about the dizzy's on the d15's?

Re:ANOTHER MINI-ME QUESTION
 

Use the D16Z6 dizzy and the VX timing belt and you should be fine. Get the gear (timing that is) while your at it to save headakes down the road.

Re:ANOTHER MINI-ME QUESTION
 

depending on what d15 u might need to do a dpfi to mpfi switch too.

Re:ANOTHER MINI-ME QUESTION
 

no, the D15's that were in the sols were MPFI stock.