a6 head on z6 block?
Well is it even possible to do? What do i need to remove or add? What kind of head gasket should i use?
|
Re: a6 head on z6 block?
add the oil jet into the block.........use a Y8 HG.......
compression will drop to 8.6:1 |
Re: a6 head on z6 block?
good compression to go turbo? basically i got a bent valve on the z6 head and since i have an extra a6 head. I wanted to slap it on for now so i can be able to drive it.
|
Re: a6 head on z6 block?
Originally Posted by Mista Bone
add the oil jet into the block.........use a Y8 HG.......
compression will drop to 8.6:1 |
Re: a6 head on z6 block?
Originally Posted by Rx7toCivic
Originally Posted by Mista Bone
add the oil jet into the block.........use a Y8 HG.......
compression will drop to 8.6:1 |
Re: a6 head on z6 block?
Originally Posted by Mista Bone
add the oil jet into the block.........use a Y8 HG.......
compression will drop to 8.6:1 |
Re: a6 head on z6 block?
I just put a b1 head on a z6 with no problems. Like everybody said you have to put an oil jet on the z6 block ( before you ask, there's a place for it. )
|
Re: a6 head on z6 block?
Originally Posted by whiterice
Originally Posted by Rx7toCivic
Originally Posted by Mista Bone
add the oil jet into the block.........use a Y8 HG.......
compression will drop to 8.6:1 |
Re: a6 head on z6 block?
people do things ass-backwards............
makes like a PITA trying to explain simple stuff............ Reverse engineer.......... |
Re: a6 head on z6 block?
would you use a p06 ecu for this?
|
All times are GMT -5. The time now is 03:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands