90-91 Teg Complete Knuckle Swap onto 91 crx HF ????
06-07-2003, 11:46 AM
#12
1.0 BAR
Join Date: Apr 2003
Posts: 356
Re:90-91 Teg Complete Knuckle Swap onto 91 crx HF ????
yea dude, try it.....i heard it worked, but you just need to get an alignment done(and you obviously need an alignment anyhow).....nothing serious though....please let us know cause i am considering the same swap
06-07-2003, 05:12 PM
#13
1.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 632
Re:90-91 Teg Complete Knuckle Swap onto 91 crx HF ????
alright...well when the weather clears up im gonna put one on and see how she does....its just i wont be able to drive it unless i had SI axles because my HF axles wont fit into the Teg Knuckles.
lewis
lewis
06-10-2003, 09:18 AM
#15
0.5 BAR
Join Date: Dec 2002
Posts: 53
Re:90-91 Teg Complete Knuckle Swap onto 91 crx HF ????
It ***** up the Susp. geometry. You will only exaggerate your problem. The DA Knuckles will push out the wheels give it more camber becuse you are lowered. Wish I could find a pic I Had of a my friends EF we put a DA set up on his and the camber was way off. I dont know why the shops are telling you this it been done before and shown to have ill effects, yes you can get it all to bolt up and work you will thow off the handling.. I say get the EX Hubs and bolt on the TEG rotors and Calpers and be done.. But if you want to try....
06-10-2003, 05:15 PM
#16
0.0 BAR
Join Date: Jun 2003
Posts: 24
Re:90-91 Teg Complete Knuckle Swap onto 91 crx HF ????
Is the only reason you are going with integra knuckles for the chamber issue? I would get some 90-91 SI knuckles/hubs and install them with a chamber kit. You will not hurt your suspension this way!
Just a penny
SlowC
Just a penny
SlowC
Thread
Thread Starter
Forum
Replies
Last Post
bitchasscracker
General Discussion
31
04-04-2008 09:34 PM
stillnoturbo
Wanted
0
04-07-2005 09:44 AM
