SkunT

Just curious on the 114.3 hubs, what US axles work with the DC2/EG chassis?

I don't have axles laying around the test/check it out with, and I have searched and came up with nothing.

stillnoturbo

I'm pretty sure it's the same spline and yada yada as the USDM stuff. I've heard of people even doing a 96 ITR 4 bolt swap on d-series setups.

RENR

i think you need b series inners with prelude outers..

SkunT

ahh...ok.

on my ITR, my ------- axle is seized into the hub, so im replacing everything. Used axles are gonna run me around $300+ and I can easily get new ---- for around that much stateside, so im looking for a stateside replacement.

GSR axles are only $100 a peice from advance...



this guy is saying dam near anything will work
http://www.honda-tech.com/zerothread/2000754

turbohf

96-97 4 lug Rs are gonna use standard 32mm axles...

so for USDM cars you need axles from any 94-01 Integra or 99-00 Civic Si or 94-97 del Sol, but i would ask for Integra parts, cuz they WILL ---- it up if you ask for Civic/del Sol ----... but you will need a new hub from Honda in Japan of course for the 96-97 R....

turbohf

but you cant use D-series axles in a B-series :1

turbohf

for 98+ JDM ITR's

SkunT

yeah, I kinda thought about that also.

As for the hub, I found the entire assembly from mainland for about $65 shipped. Should be here beg. of next week.


Thanks for the info.

stillnoturbo

I paid like 60 per axle from Autozone when I was doing my b-series swap. That 100 per axle from Advance sounds kinda pricey.

turbohf

i usually pay 60+core for reman, 90 each for new ones...