catch.can

Allrite guys what up, here the situation. I have a 99 ex that used to be auto and now in manual.
I purchased a JDM obd1 gsr swap.
I am using the obd2 harness on the obd1 motor with obd2-1 conversion harness going to obd1 jdm p72.
**How do i wire up the IAB's? most info iv found is for EG's etc.?

**IAT
I know that i will have to convert from the 3 pin plug to the 2 pin plug. I sthat correct?

** Do i have to do anything with the CFK or just leave it unplugged??

**IAC Valve
Well sense it used to be automatic it has the 3 pin plug, so im going to put on a 2 pin plug. Correct??

***FIT Valve (Fast idle Thermo)
Do i have to connect this?
EDIT:I read that that is only on auto's, so i should need it.

***IAB (secondary butterfly's)
How do i wire them up,keep in mind obd1 motor,obd2 harness, obd2 to 1 conversion harness into obd1 ecu
I heard somewhere you can unhook the evap or something and use that plug? or i could just put in an extra plug i have and just wire it to the harness correct? what wires?

I think thats all the questions i have for now, Thanks for all your help guys, appreciate it.

-Dan

catch.can

bump

Ravage70

if u dont know what ur doing and where to get the info for this, ur car will never run again
search google before u ---- everything up

catch.can

Ravage, I have done many swaps myself, just i am a ef guy and this obd2-1 ---- is retarded and im doing it for a friend. I myself have a 91 crx si with a jdm type r w/ i/h/e/ ctr cams/uberdata/obd0-1 cconversion on a p28

Ravage70

u need an obd1 engine harness but not to use, just to use as a donor for clips
u run ur original harness but modified
when a plug is different on the obd1 engine use the obd1 plug, its very simple, the trick is to get a wiring diagram so u know which wire color to discard and which to keep
wiring is a very tricky thing, dont ---- up, and solder dont just use black tape

catch.can

I have been using the obd1 engine harness that came with the jdm gsr, i have been soldering then covering with electrical tape when im done. I was just looking for some clarification on some of the things that iwas asking about. i appreciate the help.