I dyno'd my crx(91 hf) today at maxwell dodge in austin tx. It took three runs to get a descent air/fuel graph. Here is the dyno chart.

185.6hp 163.5tq


Setup:
ZC DOHC
jrc front mount
hf mani
14b turbo
fmu
8 psi

 

decent numbers a little rich right there around 3000 and 3800 rpm but otherwise not bad afr's for an fmu on 8 psi...at least its safe!!! where does the turbo spool? when does it reach 8 psi?

 

Get a bigger turbo and TurboEdit

 

I put down 200 with my zc.
JRC front mount
log mani
t3 42/48
dsm 450s
turboedit

It was a bit on the lean side then 13:1 across.
Ditch that crappy fmu and run a chipped ecu.