HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- General Discussion (https://www.homemadeturbo.com/general-discussion-6/)

- - zc dyno results (https://www.homemadeturbo.com/general-discussion-6/zc-dyno-results-34895/)

clayfigures119

02-09-2005 03:56 PM

zc dyno results

I dyno'd my crx(91 hf) today at maxwell dodge in austin tx. It took three runs to get a descent air/fuel graph. Here is the dyno chart.

185.6hp 163.5tq
http://img229.exs.cx/img229/5358/scan00032tn.jpg

Setup:
ZC DOHC
jrc front mount
hf mani
14b turbo
fmu
8 psi

boosted_b16

02-09-2005 04:10 PM

Re:zc dyno results

decent numbers :D a little rich right there around 3000 and 3800 rpm but otherwise not bad afr's for an fmu on 8 psi...at least its safe!!! where does the turbo spool? when does it reach 8 psi?

nonvtec

02-09-2005 04:36 PM

Re:zc dyno results

Get a bigger turbo and TurboEdit

CivicZC

02-09-2005 04:45 PM

Re:zc dyno results

I put down 200 with my zc.
JRC front mount
log mani
t3 42/48
dsm 450s
turboedit

It was a bit on the lean side then 13:1 across.
Ditch that crappy fmu and run a chipped ecu.

All times are GMT -5. The time now is 08:22 AM.