Yet another HMT project on the road
#1
Yet another HMT project on the road
I thought I would show my hmt project and see what you guys thought of it.I would love to here any comments on what you see that could/should be done better etc.
Car- 1990 Civic std hatchback [mpfi swap done]
Engine- Sohc ZC non vtec
Turbo- DSM T25,STD manifold ,SRT4 intercooler[modified],DSM blowoff valve,
Management\Fuel- Turbo Edit, DSM 450's and a Walbro pump
It's currently running on a basemap I made that is fairly conservative but I think with 10psi and a good tune it should lay down some good times at the track.The oil line setup with the brass is pretty ugly but is working quite well for now and leak free.The exhaust is side exit home made consisting of 2.5 mandrel bent 90,1 24" cherrybomb,a few feet of pipe and a turndown.It actually sounds pretty nice no raspyness just nice and deep.Body is pretty nasty not many straight panels on it but I'm gonna hit with a few cans of bondo and some flat black in spring.Last the rad mounting def needs some work as it is being pulled to one side by the stock mount.Been reading on this site for a year or two now and I've def learned alot best forum out there.Also thanks to Xenocron for the ecu gear and burner.
Car- 1990 Civic std hatchback [mpfi swap done]
Engine- Sohc ZC non vtec
Turbo- DSM T25,STD manifold ,SRT4 intercooler[modified],DSM blowoff valve,
Management\Fuel- Turbo Edit, DSM 450's and a Walbro pump
It's currently running on a basemap I made that is fairly conservative but I think with 10psi and a good tune it should lay down some good times at the track.The oil line setup with the brass is pretty ugly but is working quite well for now and leak free.The exhaust is side exit home made consisting of 2.5 mandrel bent 90,1 24" cherrybomb,a few feet of pipe and a turndown.It actually sounds pretty nice no raspyness just nice and deep.Body is pretty nasty not many straight panels on it but I'm gonna hit with a few cans of bondo and some flat black in spring.Last the rad mounting def needs some work as it is being pulled to one side by the stock mount.Been reading on this site for a year or two now and I've def learned alot best forum out there.Also thanks to Xenocron for the ecu gear and burner.
#7
Re: Yet another HMT project on the road
Don't worry I'm actually going to take the time to properly prep,mask everything and use a proper paint gun.I would paint it a real color but my body work skills are fairly sad so hopefully you won't be able to notice with the flat black.