DeleriouS

does anyone know/know how i can find out what the pressure is on an 95' Integra for the winshield washer fluid pump?
thanks

Xgenturbo

Can you explain the why, what and how of it?

rollmodel

could be for a homemade ic sprayer..

or, just plain out curiousity

con

19.3 bar

Bone1

dunno the pressure, but works great for a homemade Aquamist setup!!!!!!

LSD Motorsports

You can do it one of two ways, some thermo dynamic calculations (pm me) or you can go buy a pressure gauge for liquid. Id guess its around .3 psi

needahonda

they put out about 30-40 psi depending on how old they are. Not enough to mist water but enough to spray water =)

fork

its way more than .3 psi a person can blow 1 psi and you can't squirt water out of a straw like a windsheild sprayer. adn I hate thermodynamics

DeleriouS

i was actually looking to do a homemade aquamist setup. i was going to get this... http://www.coolingmist.com/detailpage.aspx?pid=13

I was going to get the 3.9GPH sprayer, because the guy gave me this list...

0 to 200 hp =2.3
200 to 350 = 3.9
350 to 500 = 4.9

and the 10 GPH is for 800 + HP.

I was going to hook it up to my winshield fluid pump and have it spray into my intake manifold. Someone told me that i would probably need the 100psi pump becuase i was going to be doing more than 10psi - is that true? i mean, for $10 its worth a shot...right? I made a home made IC sprayer - I will have some pics soon....its pretty sweet. thanks

90accordIHI

for an aquamist setup, couldn't you use a sprayer tip that is extremely small? if i'm right in theory, that would increase pressure.