----- Red Sedan is done! Pics inside.
04-24-2008, 07:17 PM
#1
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
----- Red Sedan is done! Pics inside.
So over the weekend MadMax and Whiterice were kind enough to set some time aside to get ir done. Thanks A million you 2. SO here goes, we started around noon on saturday and finished around 3 am sunday morning. the kit consists of the following
Engine block
Vitaras 76mm with hastings rings
Ching chong meow H beams
Bearings are i believe clevites
head is stock
the machine work was done at a shop called perfect engine in los angeles.
I assembled the engine at home all by my lonesome.
it was also installed all solo by me and driven about 2k miles before the turbo install.
Turbo kit is as follows
Ching chong meaow T3/T4
Ching Chong Wastegate with 10psi spring
Custom DP made my MadMax ( bad *** )
Blitz Bov ( thanks Stillnoturbo )
450cc injectors ( KG parts ) -installed by Whiterice-
Charge pipes (me and Madmax )
custom oil drain ( no JB weld guys, sorry )
Custom brackets and relocated radiator lower hoes by Madmax and mike
Stevemode Oil line kit
Interfooler IC ( modified end tanks by Madmax )
Tuned at Adrenaline in Chatsworth by Madmax on Chrome
The car put down 177 Hp on 10psi with Vtec not working. I need a better Map and boost can go way up. For now the car runs great despite the issues with vtec and the measly 10 psi. im very happy with it so far. 300hp is not too far away.
pics below
more pics to come.. computer sucks right now.
Engine block
Vitaras 76mm with hastings rings
Ching chong meow H beams
Bearings are i believe clevites
head is stock
the machine work was done at a shop called perfect engine in los angeles.
I assembled the engine at home all by my lonesome.
it was also installed all solo by me and driven about 2k miles before the turbo install.
Turbo kit is as follows
Ching chong meaow T3/T4
Ching Chong Wastegate with 10psi spring
Custom DP made my MadMax ( bad *** )
Blitz Bov ( thanks Stillnoturbo )
450cc injectors ( KG parts ) -installed by Whiterice-
Charge pipes (me and Madmax )
custom oil drain ( no JB weld guys, sorry )
Custom brackets and relocated radiator lower hoes by Madmax and mike
Stevemode Oil line kit
Interfooler IC ( modified end tanks by Madmax )
Tuned at Adrenaline in Chatsworth by Madmax on Chrome
The car put down 177 Hp on 10psi with Vtec not working. I need a better Map and boost can go way up. For now the car runs great despite the issues with vtec and the measly 10 psi. im very happy with it so far. 300hp is not too far away.
pics below
more pics to come.. computer sucks right now.
04-24-2008, 07:52 PM
#7
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: ----- Red Sedan is done! Pics inside.
Another HMT EF that received some stillnoturbo parts luvin'. 
This makes me want to get a EF again. Dude just drive the one that broke down in Compton on us here next month and fly back home. :P
This makes me want to get a EF again. Dude just drive the one that broke down in Compton on us here next month and fly back home. :P
04-24-2008, 09:18 PM
#9
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: ----- Red Sedan is done! Pics inside.
Originally Posted by doug684
Are those Konig Heliums? I have 3 brand new center caps for them if you need them.
Motor is a A6 block with a Z6 head.
Vtec isnt working due to either the solenoid or the oil pressure. i have to figure it out. but first i need a 2.5 bar map and up the boost.
